'87 na/tii/s5 conversion major mods Haltech/custom turbo setup $3500 Ashville NC

[liquidblackracing]

I orignaly posted this up on rx7club but ill also post it up on here. I dont really post on here but im sure tray (partial owner of this web sight (lt1rx7)) can vouch for me. lol it is sitting at his house.

http://www.rx7club.com/showthread.php?t=885799

any ways def hit me up if your interested
thanks marshall

any ways ill post the mods here too.

well sad to say but im finally giving up my project to start well a new one. Ive spent countless hours working on this thing and had it perfect before i lost compression in the rear housing. The car will drive under its own power but not well. Im 99% sure that the corner seal is stuck down. I remember that happening when i was rebuilding it. Wouldn't take much to get back on the road if it dost sell i will probably end up parting it out witch i really dont feel like doing that is why im selling it for so cheep feel free to pm me but im not always on here so shoot me an email with any questions thanks I will be trying to get some more pics up i dont think i really have that many. also i will try and get a video of the car posted hopefully soon. just gotta make a trip to ashville. clean nc title in hand.
Marshall (Mcannon246@hotmail.com)


$3500

1987 mazda rx7



the motor:
series 4 TII motor

street ported
-intake housing Pineapple racing
http://www.pineappleracing.com/mediu...x-7engine.aspx
-exhaust housing housing Pineapple racing
http://www.pineappleracing.com/ep2ae...-t13b-rew.aspx) I took my time on this making sure it would flow right every thing is sloped no harsh edges

atkins rotary87-88 Turbo Overhaul Kit C
(http://atkinsrotary.com/store/catalo...C-p-16232.html)
($1180.00 ) every thing except the water seals where used in this kit

Pineapple racing HD Water Seal Kit
http://www.pineappleracing.com/hdwat...5re1986up.aspx
($185.00) great product can allow you to reopen the case and reseal it

Pineapple racing Block off plates the full set ($60)
(http://www.pineappleracing.com/13b-t...-offplate.aspx)

Pineapple racing Stainless Steel Crank Angle Sensor Cover (18)
(http://www.pineappleracing.com/stain...ver-ninja.aspx)

MAZDASPEED Motor Mount Set For RX7, 86-91 RX7 ($58)
http://www.corksport.com/mazdaspeed-...86-91-rx7.html

MAZDASPEED Transmission Mount Set For RX7, 86-91 RX7 ($27)
http://www.corksport.com/mazdaspeed-...86-91-rx7.html



Clutch and flywheel

Act 6 puck sprung clutch and pressure plate ($370)
http://www.corksport.com/act-race-cl...rx7-turbo.html

FIDANZA ALUMINUM FLYWHEEL ($400 with counter weight)
http://cgi.ebay.com/ebaymotors/FIDAN...Q5fAccessories

ss clutch line corksport ($18)
http://www.corksport.com/corksport-s...e-for-rx7.html

New clutch and slave cylnders ($80)
Auto zone

NA to TII drive shaft ($200) not sure on actual price but i know it was expensive


The Turbo

the turbo is a Borgwarner s300 equivalent to a gt30 in size with a turbonetics .96 ceramic coated rear housing. i payed a good bit for this turbo and still spools like new. it hits full boost at 3700 rpms.
($600)

Stainless steal feed and return line with an fittings ($100)

not sure on the manifold some stainless steal t4 probably ss autocrome stuff its wraped in heat wrap so i can not tell what it is. ($100)

the wastegate i believe its a fake hks dosnt have any markings on it but the same style ($40)

its a 3 in custom down pipe with custom 3" flex pipe and prob 1" flex for the recirculating wastegate ($400 made at a custom shop)

that goes down to a 3" pipe all the way back to a 3 in muffler ($250)



Cooling

V mount inter cooler set up ($500)

i think its an xspower intercooler will have to look

with a aftermarket aluminum radiator with Efans.

All tbolt clamps and reinforced couplers($100)

2.5 in intercooler piping with a synaps BOV. sounds amazing ($225) with tial type adapter
http://www.advancespeedshop.com/syna...1a-p-4934.html

Corksport ss oil cooler lines (mine are the older an fitting ones blue and red) ($130)
http://www.corksport.com/corksport-s...s-for-rx7.html



ECU

Haltech e6x with full harness and 3bar gm map sensor ($750)

comes with an old school dell computer with a new battery ($150)

and also has a ac power adapter in the car to charge the laptop while driving



na chassis

S5 front and rear bumper ($150)

side moldings ($30) front of fender and rear of corner pannel.

Vert hood ($100)

S5 custom tail lights modernized with black inlets ($300)

Old school i think racing beat triangulated strut bar ($100)

DTSS Elimater bushings/ Rear Toe Eliminator Bushing ($50)
http://www.mazdatrix.com/h6_86-92.htm

Enkei 16 in wheels ($200)

Battery relocation to behind passenger seat in bends with a battery cut off switch
and a fuel pump cut off switch ($100)

5one5 center gauge pod with auto light gauges ($300)



total parts that i can think of on top of my head ($7,271) plus the actual car and the motor

[89fc3s]

i have seen said car...

[liquidblackracing]

oh nose that means your a friend of trays. im deeply sorry :P

[89fc3s]

Aren't we all =D